Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Cap & Crown Cost in Lakewood?
A chimney cap installation in Lakewood typically runs $185 to $450, and rebuilding a damaged crown usually costs $350 to $1,200 depending on how much masonry is involved. Small crown crack repairs are the cheapest fix at roughly $200 to $450. When you need both a new cap and crown work, most Lakewood homeowners land somewhere between $450 and $1,400 for the pair. Every figure here is an estimate for the local market, and the written estimate we provide after inspecting your flue sets the final price.
Those ranges assume a standard residential chimney. Steeper pitches, tall stacks, and heavy masonry damage all push the number up. We give free estimates, and Oasis Chimney Sweep handles the sweep, the inspection, and the repair as one job, so there’s no handoff partway through.
Chimney Cap & Crown Cost Breakdown (2026)
Here’s how the line items usually fall out for a Lakewood chimney. These are typical estimates, not quotes. Your written estimate is what counts.
| Work item | Typical cost range |
|---|---|
| Standard single-flue cap (galvanized or stainless) | $185 – $350 |
| Multi-flue cap or custom-fabricated cap | $300 – $600 |
| Small crown crack repair / spot sealing | $200 – $450 |
| Partial crown rebuild | $450 – $800 |
| Full crown rebuild with new cap | $750 – $1,400 |
| Custom crown with overhang and drip edge | $900 – $1,600 |
| Cap replacement only (you supply nothing) | $185 – $450 |
What pushes the number up? A tall stack means more staging and more time. A badly spalled crown – one where chunks are flaking off and the concrete won’t hold a patch – means a rebuild, not a repair. Custom cap fabrication for an odd flue size or multiple flues costs more than an off-the-shelf unit. Access is the quiet cost driver in Lakewood: chimneys set behind a sloped roof or tight to a neighbor’s lot line take longer to reach safely, and that time is in the estimate. What keeps cost down is catching a hairline crack before it becomes a rebuild, and choosing a standard stainless cap over a custom fabrication when your flue is a standard size.
What Affects Chimney Cap & Crown Pricing in Lakewood
- Roof pitch and chimney access. Lakewood’s mix of mid-century ranch homes and newer two-story builds means some chimneys sit low and easy to reach, and others perch high on a steep pitch. The steeper and taller, the more time and staging the job takes.
- Condition of the crown itself. A surface crack that hasn’t reached the flue is a sealing job. Concrete that has cracked through, separated from the flue, or lost its overhang is a rebuild. The difference in price between those two situations is the single biggest swing on this page.
- Cap material and fit. Galvanized steel is the budget option. Stainless steel lasts longer and costs a bit more. A custom cap fabricated to fit an irregular flue or a multi-flue stack sits at the top of the cap range.
- Freeze-thaw cycles. Lakewood sits at the foot of the Front Range, and the cycle of warm afternoons and freezing nights works on masonry. Water gets into a small crack, freezes, expands, and opens it wider. That’s why crown work here often costs more if it’s put off a season or two.
- Flue count and configuration. A single flue is straightforward. A chimney serving a furnace flue plus a fireplace flue means a multi-flue cap and more measurement, which moves you up the range.
- Whether repair is bundled with other work. If the crown and cap go in during a scheduled sweep and inspection, there’s less setup than making a separate trip for each task. We handle all three under one contractor, so nothing gets split across companies.
How to Save on Chimney Cap & Crown
The cheapest crown repair is the crack you seal before winter. Once water has worked into the masonry through a freeze-thaw season, a $200 spot repair becomes a $700 rebuild. Scheduling inspection before the first hard freeze is the most reliable way to keep the number down.
A few other practical moves:
- Fix the crack early. A surface crack that’s caught now is a sealing job. The same crack next spring may be a rebuild.
- Choose stainless over galvanized where it makes sense. A standard stainless cap sits mid-range and holds up to weather far better than the cheapest galvanized unit, so you’re not replacing it again soon.
- Bundle the cap with the crown work. If both need doing, one visit covers both, and the estimate reflects that.
- Get the written estimate before anyone starts. Ours are free, and the price is set per job by that written estimate, so there are no surprises.
A chimney inspection is how you find out which category you’re in before you commit. We identify the problem first, then price the fix. Call (888) 320-6023 for a free estimate.
Does a Chimney Cap Actually Save You Money?
Yes. A cap keeps water, squirrels, birds, and debris out of the flue, and it’s the least expensive way to protect the crown and liner below it. Without a cap, rain hits the crown directly and works into every crack, and animals nest in the flue. The cap costs $185 to $450 in Lakewood; the liner and crown damage it prevents can run into the thousands. It’s the cheapest insurance on the whole chimney.
When we install a cap, we match it to your flue and your roofline. A cap that’s too small or poorly fitted lets water in at the edges. We work with professional-grade product lines from Olympia Chimney and others because a cap is a part that has to last, not a generic cover that rusts out in a couple of seasons.
How Long Does a Chimney Cap and Crown Job Take?
Most cap installations are done in a couple of hours. A crown repair or partial rebuild typically takes half a day, and a full rebuild with a new cap can run a full day once the concrete has to cure. We schedule the work so you know what to expect, and same-day service is often possible for straightforward cap replacements.
One thing worth knowing about crown work: the concrete needs time to set before it’s exposed to weather, and in Lakewood’s shoulder seasons that timing matters. We’ll tell you honestly what the schedule looks like rather than rushing a cure that fails by spring.
Repair or Replace: Which Makes Sense for Your Crown?
If the crown is cracked but still bonded to the flue and hasn’t lost its overhang, a repair usually makes sense and costs $200 to $450. If the concrete is spalling, separated, or crumbling, a rebuild at $450 to $1,200 is the honest answer. Patching a failing crown just delays the same repair at a higher price.
We make that call after inspecting the crown, not from a photo. The inspection is part of what we do; it’s not an add-on. Once we know the condition, we tell you which option fits and why, and you get it in writing before any work starts.
What We Use and Why It Matters for Your Flue
Cap and crown work sits on top of the chimney, but the materials underneath matter just as much. When a crown repair reveals a damaged liner, we use HeatShield, the ceramic resurfacing system, to restore it where the liner is still sound enough for repair. When a liner needs full replacement, we specify DuraFlex flexible liner systems, which fit older and irregular flue shapes that rigid liners can’t follow.
We also work with Gelco, Famco, and Copperfield, alongside Olympia Chimney and the others named above. These are the product lines professional chimney contractors nationwide rely on, and we stock none of them on a truck. We bring the right material for your flue. A generic cap and a bag of patch mortar may look the same on the invoice, but they don’t hold up the same way through a Front Range winter.
If your fireplace hasn’t been looked at in a while, an inspection is the place to start. Our technicians have up to 14 years of experience reading exactly this kind of wear. See what we cover for Lakewood homeowners and how a visit works.
Frequently Asked Questions – Chimney Cap & Crown Cost
How much does a chimney cap cost in Lakewood?
A standard chimney cap in Lakewood typically costs $185 to $350 installed, and a multi-flue or custom cap runs $300 to $600. Stainless steel sits mid-range and lasts longer than galvanized. Call (888) 320-6023 for an exact quote. Estimates are free.
How much does chimney crown repair cost in Lakewood?
Small crown crack repairs cost about $200 to $450, a partial rebuild runs $450 to $800, and a full rebuild with a new cap falls between $750 and $1,400. The written estimate after inspection sets the final price. Call (888) 320-6023 to book a free estimate.
Is it cheaper to repair or replace a chimney crown?
Repair is cheaper when the crown is still bonded and only cracked, at $200 to $450 versus $450 to $1,200 for a rebuild. If the concrete is spalling or has separated from the flue, a rebuild is the lower long-term cost because patching a failing crown just buys a season. We inspect first and tell you which applies.
Can you install a chimney cap and repair the crown in the same visit?
Yes, in most cases the cap and crown work are done together, which keeps the total estimate lower than two separate trips. Bundled cap and crown work in Lakewood typically lands between $450 and $1,400. Call (888) 320-6023 to schedule.
Do I need a cap if my chimney already has a crown?
Yes. The crown sheds water off the top of the masonry, but it doesn’t stop rain from entering the flue or keep animals out. A cap at $185 to $450 protects the flue opening the crown can’t cover. The two work together, and skipping the cap shortens the life of the crown and liner.
Why Lakewood Homeowners Call Us for Cap and Crown Work
We do three things: chimney sweeping, chimney inspection, and chimney repair. Cap and crown work is repair, and it’s done by the same team that inspects the flue, so the person who finds the problem is accountable for the fix. No referrals, no gaps. We use recognized professional-grade product lines throughout, and we tell you what’s going in your chimney and why.
You don’t need to know the difference between a HeatShield repair and a DuraFlex reline to call us, though many of our customers have already looked it up. We’ll walk you through what your chimney actually needs and what it will cost. Free estimates, upfront pricing, and a straight answer about whether you’re looking at a repair or a rebuild.
When the work is done, the goal is simple: your fireplace should be the safest room in the house. We make sure of it from the cap down. If a cap or crown problem has you wondering what it will cost, the fastest way to a real number is a call.
Call (888) 320-6023 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Closed Saturday. A call outside dispatch hours is booked into the next opening.
Pricing reflects the Lakewood market as of 2026. Oasis Chimney Sweep offers free estimates. Call (888) 320-6023.
Written by the team at Oasis Chimney Sweep.
What Our Customers Say
"Liner was cracked in two places. He walked me through the repair options honestly, including the one that was cheaper for him and better for me."
- Bryce Miller"Crown was cracked and taking water. Repaired it rather than quoting a rebuild, which the previous company had pushed hard for."
- Kelly Anderson"Swept it, capped it, and installed a proper damper. The downdraft smell in the summer that we'd lived with for years is gone."
- Christine Tran