Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Liner & Rebuild Cost in Lakewood?
Chimney liner and rebuild work in Lakewood typically runs $2,400 to $9,500, with most full stainless liner installs landing between $3,200 and $5,800 and a partial chimney rebuild (crown, cap, and upper courses) falling in the $2,400 to $4,600 range. A full top-to-bottom rebuild on an older masonry chimney is the upper end of that spread, often $7,000 to $9,500 once the firebox and smoke chamber are addressed. The exact figure depends on your flue’s condition, the liner diameter and material you choose, and how much of the exterior stack has to come down and go back up.
Those are estimates for the Lakewood market in 2026. Your written estimate sets the final price, and it costs nothing to get one. Call (888) 320-6023. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Key Takeaways
- Most Lakewood homeowners spend $3,200 to $5,800 on a stainless steel liner install.
- HeatShield ceramic resurfacing can repair a sound-but-cracked liner for $1,800 to $3,400 when the flue is still structurally intact, an alternative to full relining.
- A full chimney rebuild (the whole masonry stack) runs $7,000 to $9,500 and depends heavily on how much exterior work is exposed to Lakewood’s freeze-thaw swings.
- Liner size, insulation, cap and crown, and whether the flue needs resizing all move the number.
- Estimates are free. Call (888) 320-6023 for a written range on your chimney.
Chimney Liner & Rebuild Cost Breakdown (2026)
Here’s how the line items stack up for Lakewood in 2026. Each range assumes a typical single-family home with one flue; multi-flue and unusually tall chimneys push toward the high end.
| Line item | Typical range | What it covers |
|---|---|---|
| Chimney inspection (Level 2) | $150 – $400 | Camera inspection of the flue, smoke chamber, and crown before any liner work |
| Stainless steel liner install (uninsulated) | $2,400 – $4,200 | DuraFlex flexible liner sized to the flue, with top and bottom connections |
| Stainless liner with insulation wrap | $3,200 – $5,800 | Adds insulation blanket for better draft and creosote protection |
| HeatShield ceramic resurfacing (liner repair) | $1,800 – $3,400 | Resurfacing a sound-but-cracked clay flue instead of a full reline |
| Crown rebuild | $450 – $1,200 | New crown to shed water off the top of the stack |
| Partial rebuild (upper courses, cap, crown) | $2,400 – $4,600 | Rebuilding the top few feet of masonry plus new cap and crown |
| Full chimney rebuild | $7,000 – $9,500 | Tear down and rebuild of the whole exterior stack, often with new flue tile or liner |
| Chimney cap and damper | $250 – $900 | New cap to keep out water and animals; top-sealing or throat damper |
What moves the number most is the scope of the rebuild. A crown and cap job is a same-day repair. A partial rebuild adds a few feet of work. A full rebuild is a multi-day masonry project, and that’s where the $7,000+ figures come from. On the liner side, insulation is the single biggest swing: an uninsulated liner can price at half of an insulated one, and whether you need the insulation depends on the flue’s condition and the appliance you’re venting. A camera inspection tells us which direction your chimney actually needs before anyone quotes a number.
Oasis Chimney Sweep handles the sweep, the inspection, and the repair under one contractor, so you don’t get handed off between a sweep who finds the problem and a mason who fixes it. Full-service chimney work means a single point of contact from diagnosis through completion.
What Affects Chimney Liner & Rebuild Pricing in Lakewood
Lakewood sits on the west side of the Denver metro against the foothills, and that geography shapes chimney work in ways a flatland quote won’t capture. The freeze-thaw cycle here is hard on masonry. Water gets into hairline cracks, freezes overnight, expands, and widens the crack. Over a few winters that’s how a crown repair becomes a partial rebuild. The same swings stress old clay flue tile. Here’s what actually drives your price.
- Liner material and insulation. Stainless steel flex liner is the standard reline. Whether it’s wrapped in insulation, and how thick, moves the price by a few hundred to well over a thousand dollars. Higher-efficiency appliances and wood stoves usually call for the insulated version.
- Flue shape and condition. Older or irregular flues that won’t take a rigid liner cleanly need a flexible system. We specify DuraFlex liner systems for relining because they fit around offsets and irregularities that rigid pipe can’t, so you pay for a proper fit rather than a forced one.
- Repair vs. replace. When the clay flue is still structurally sound but cracked, HeatShield ceramic resurfacing can restore it instead of a full reline. That’s often thousands less, and it’s the repair-first path we check before recommending a new liner.
- How much masonry is exposed. A chimney on an exterior wall facing the weather takes more damage than an interior one. The taller the exposed stack, the more courses come down in a rebuild.
- Access and roof pitch. Steep roofs and tight side yards add labor. A chimney that’s easy to stage from the ground prices lower than one that needs scaffolding.
- Code and clearance issues. Most cities require a permit for structural chimney work and for relining, so ask Lakewood’s building department what applies to your job. Clearance-to-combustibles problems sometimes surface during inspection and have to be corrected as part of the work.
Our technicians have up to 14 years of experience reading flues, and most of what separates a low quote from a high one is how much of the problem the low quote didn’t account for. A number that assumes the crown is fine and the flue is straight often isn’t the number you end up paying.
Should You Repair the Liner or Rebuild the Chimney?
Repair the liner if the clay flue is sound but cracked; rebuild the chimney if the masonry itself is failing. Those are two different problems with two very different price tags, and the inspection is what tells them apart. A liner repair with HeatShield ceramic resurfacing runs $1,800 to $3,400 and keeps an otherwise healthy chimney in service. A full reline runs $2,400 to $5,800. A chimney rebuild is a masonry job at $2,400 to $9,500 depending on scope.
It’s rarely cheaper to tear down a chimney that only needs a liner. It’s also false economy to reline a stack whose crown is crumbling and whose mortar joints are washing out, because the water damage will undo the liner work. The inspection is where we sort that out. A chimney inspection isn’t optional maintenance. It’s how you know your fire is safe before you light it, and it’s how you avoid paying for the wrong repair.
What Brands Go Into a Chimney Liner in Lakewood?
We work with professional-grade product lines rather than whatever generic supply is cheapest. That matters because a liner is only as good as its steel, its connections, and the fit to your specific flue. For relining, we use DuraFlex flexible liner systems, a flexibility-first solution that suits older and irregular flue shapes. For liner restoration, we use the HeatShield ceramic resurfacing system, a professional-grade product most DIY-tier competitors don’t stock or know how to apply. Our roster also includes Gelco, Olympia Chimney, Famco, and Copperfield, and we pick the right one for the repair rather than defaulting to a single brand for everything.
We carry the same product lines professional chimney contractors nationwide rely on. When you ask what’s going into your flue, the answer is a named, recognized product, not a category. That’s part of the reason a Lakewood quote from us may differ from a bare-bones number: the materials are part of the price, and they’re the part that determines how long the repair lasts.
If you’re still deciding whether to repair or reline, it helps to understand the full scope of repair work we handle alongside the liner. You can see how liner and rebuild fit into our other work on the Oasis Chimney Sweep home page, and read more about how we approach chimneys across the Lakewood area.
How to Save on Chimney Liner & Rebuild
There are real ways to keep the number down without cutting into the parts that matter.
- Catch it early. A crown repair now ($450 to $1,200) can prevent the water infiltration that turns into a partial rebuild later ($2,400 to $4,600). The cheapest rebuild is the one you never needed.
- Ask about repair-first options. If your flue is sound but cracked, HeatShield resurfacing can save over a full reline. Not every chimney qualifies, but it’s worth asking before you accept a reline quote.
- Bundle the cap and crown with liner work. Doing the crown and cap in the same visit as a liner install usually costs less than scheduling them separately.
- Get the inspection first. A camera inspection ($150 to $400) tells you exactly what you’re paying for. Quoting a rebuild without one risks paying for work the chimney didn’t need, or missing work it did.
- Get a written, itemized estimate. A line-item range that separates the liner from the crown from the rebuild lets you compare quotes honestly instead of guessing what’s included.
Estimates are free. If you’ve had a quote you’re not sure about, or you just want to know what your chimney actually needs, call (888) 320-6023. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
FAQs – Chimney Liner & Rebuild Cost
How much does a chimney liner cost in Lakewood?
A chimney liner in Lakewood typically runs $2,400 to $5,800, depending on whether it’s insulated and how complex the flue is. A basic uninsulated stainless install lands near the low end; an insulated DuraFlex system for an irregular older flue sits toward the high end. Call (888) 320-6023 for an exact figure. Estimates are free.
How much does a chimney rebuild cost in Lakewood?
A chimney rebuild in Lakewood ranges from $2,400 for a partial rebuild to $9,500 for a full stack rebuild. A crown-and-cap job is the low end of that, and a full exterior rebuild with new flue work is the high end. The range is wide because the scope is: what’s crumbling and how much has to come down sets the price. Call (888) 320-6023 for a written estimate on your chimney.
Is it cheaper to repair the liner or replace it?
Repairing a cracked-but-sound clay flue with HeatShield ceramic resurfacing is usually cheaper than a full reline, often $1,800 to $3,400 versus $3,200 to $5,800. It only works when the flue is structurally intact. If the tile is broken or missing, a new liner is the right call. The inspection decides which you need. Call (888) 320-6023 to find out which applies to your flue.
How long does a chimney liner or rebuild take?
A liner install is typically a single day, and a crown-and-cap repair is the same. A partial rebuild takes a few days, and a full rebuild spreads across several depending on weather and drying time for the mortar. We’ll give you a realistic timeline with your written estimate. Call (888) 320-6023 to schedule the inspection that starts it.
Can you come today?
Same-day service is often possible when you call early. We answer 24/7 and dispatch from 7am to 7pm, Sunday through Friday. A call outside dispatch hours is booked into the next opening. Call (888) 320-6023 and we’ll get your chimney looked at and your range quoted.
Do I need a permit for chimney liner or rebuild work in Lakewood?
Most cities require a permit for structural chimney work and for relining, so ask Lakewood’s building department whether your job needs one. It’s a routine question, and it’s part of how we scope a rebuild versus a repair before quoting.
Contact Oasis Chimney Sweep for a Free Estimate
Chimney liner and rebuild pricing in Lakewood comes down to a real inspection of a real flue, not a phone guess. Oasis handles the sweep, the inspection, and the repair with the same team, using recognized professional-grade products like DuraFlex and HeatShield, so you’re paying for the right materials and a proper fit. Your fireplace should be the safest room in the house, and a clear, itemized estimate is where that starts. Call (888) 320-6023 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Pricing reflects the Lakewood market as of 2026. Oasis Chimney Sweep offers free estimates – call (888) 320-6023.
What Our Customers Say
"Liner was cracked in two places. He walked me through the repair options honestly, including the one that was cheaper for him and better for me."
- Bryce Miller"Crown was cracked and taking water. Repaired it rather than quoting a rebuild, which the previous company had pushed hard for."
- Kelly Anderson"Swept it, capped it, and installed a proper damper. The downdraft smell in the summer that we'd lived with for years is gone."
- Christine Tran